https://oneuppuzzle.com/ I finished the puzzle #646 (8x8) in 4 minutes, 41 seconds in One Up Puzzle.
- 1 Post
- 13 Comments
I am 190cm and got a Brompton C-Line with Telescopic Seatpost. The seller recommended it for my size - i use 5 cm of it.
datenhamster@feddit.orgto
Kaufempfehlungen - gute, haltbare Produkte, die man kennen sollte@feddit.org•❔ Erfahrung mit dynamischen Stromtarifen?
6·9 months agoHabe Tibber. Eine Person tagsüber zu Hause. E-Auto. Beste Wahl bisher. Habe gerade mal bei Check24 geguckt. Komme mit Festpreis in Hamburg aktuell auf 34 Cent. Unser Nutzungsprofil bei Tibber ca. 27 Cent im Schnitt. Ginge günstiger, wenn wir zu billigeren Zeiten vorkochen würden. Um eine App wirste vermutlich nicht rum kommen.
datenhamster@feddit.orgto
BuyFromEU@feddit.org•Finally, a Linux laptop with a brilliant display and performance that rivals my MacBook (from Germany)English
6·1 year agoI have exactly this laptop - with 96 GB RAM. It is really as good as described.
Just bought an Tuxedo InfinityBook. Very nice piece of hardware.
datenhamster@feddit.orgtoCommunity für überregionale Wahlen@feddit.org•ARD nimmt Quiz mit Bernhard Hoëcker aus dem Programm
9·1 year agoNa schön, mehr Sendezeit für Alitsches Lügen.
datenhamster@feddit.orgOPto
homeassistant@lemmy.world•Automation switching TRV on and off in 1° range over targetEnglish
1·1 year agoOk, now I know why. without the +1 the automation does not trigger when the temperature is over the target and the TRVs running on idle. The +1 triggers the automation and switches them off until the room temperature is under the target temperature. So it does not explain why the mode is switched from heat to off or the other way around in the target +1° range.
datenhamster@feddit.orgOPto
homeassistant@lemmy.world•Automation switching TRV on and off in 1° range over targetEnglish
1·1 year agoThank you. I will look at it
datenhamster@feddit.orgOPto
homeassistant@lemmy.world•Automation switching TRV on and off in 1° range over targetEnglish
1·1 year agoI was young and… I don’t know why I used it a few years ago. I will try your suggestion.
datenhamster@feddit.orgOPto
homeassistant@lemmy.world•Automation switching TRV on and off in 1° range over targetEnglish
1·1 year agoI use the generic thermostat but I want to switch the TRVs to different temperatures/states depending on a schedule and if we are at home or not. The automation changed over the last 3 or 4 years but basicly it was one of my first experiments with HA. It worked flawless and did what it should.
Maybe it’s not the best or refined but it worked.
triggers: - entity_id: - sensor.wohnzimmer_temp trigger: state conditions: - condition: and conditions: - condition: state state: "off" entity_id: binary_sensor.balkontur_contact - condition: state entity_id: input_boolean.wohnzimmer_heizung state: "on" - condition: template value_template: >- {% if states('input_boolean.away_mode')=='off' %} {% if states('schedule.testkalender')=='on' %} {{ states('sensor.wohnzimmer_temp') | float < states('input_number.wohnzimmer_temperatur_tag') | float + 1 }} {% else %} {{ states('sensor.wohnzimmer_temp') | float < states('input_number.wohnzimmer_temperatur_nacht') | float + 1 }} {% endif %} {% else %} {{ (states('sensor.wohnzimmer_temp') | float) | round < states('input_number.temperatur_away_mode') | float + 1 }} {% endif %} enabled: true actions: - action: climate.set_temperature target: entity_id: climate.heizung_wohnzimmer data: temperature: | {% if states('schedule.testkalender')=='on' %} {{ states('input_number.wohnzimmer_temperatur_tag') | int + states('input_number.wohnzimmer_heizung_offset') | int }} {% else %} {{ states('input_number.wohnzimmer_temperatur_nacht') | int }} {% endif %} hvac_mode: | {% if states('input_boolean.away_mode')=='off' %} {% if states('schedule.testkalender')=='on' %} {% if states('sensor.wohnzimmer_temp') | float < states('input_number.wohnzimmer_temperatur_tag') | float %} heat {% else %} off {% endif %} {% else %} {% if states('sensor.wohnzimmer_temp') | float < states('input_number.wohnzimmer_temperatur_nacht') | float %} heat {% else %} off {% endif %} {% endif %} {% else %} {% if states('sensor.wohnzimmer_temp') | float < states('input_number.temperatur_away_mode') | float %} heat {% else %} off {% endif %} {% endif %} mode: single
datenhamster@feddit.orgOPto
homeassistant@lemmy.world•Automation switching TRV on and off in 1° range over targetEnglish
2·1 year agoThey are Sonoff TRVZB. Bosch changed the firmware and with 3.7.4 the TRVs startet to recalibrate and reboot at random times. Sometimes 15 minutes in a row. Bosch said: Thats your valves, change them, not our fault.
datenhamster@feddit.orgto
Verkehrswende@feddit.org•Forderung des Fußgängerverbands: Bei Grün gehen, bei Rot ... auch?Deutsch
23·1 year agoDie teils in Frankreich praktizierte Lösung würde reichen: Fußgänger immer grün, Autos immer rot. Ampel schaltet für Autos auf grün wenn sich ein Fahrzeug nähert.


In German, but yes, made my own CO2-Sensors.
https://basteln.webhafen.de/2023/03/co2-sensor-selbst-bauen