Brave is the least bad chromium browser

It’s pretty sleazy. Ungoogled Chromium or Vivaldi are probably less sleazy, if at all.

i added 2-3 other adblockers

Never run multiple adblockers at the same time. You gain nothing except broken websites, performance issues, and an increased chance of triggering anti-adblocks.

EasyPrivacy should block Meta and Yandex pixels by default. If you have the knowledge you can put uBO in “hard mode” which will block all 3p connections. It requires you to know which CDNs to allow or websites will be broken.

uBO do remove trackers with the EasyPrivacy and uBlock filters – Privacy filters. More filters and options can also be enabled if you know what you’re doing. For beginners it’s best to stick to the default settings as more additions can lead to more breakage.

If you use uBO then Ghostery is redundant. It can also cause some of uBO’s filters to not work correctly.

Also uBO can do what you did with stylebot. (If you use the full uBO extension, and not the limited Lite version for Chromium browsers):

youtube.com##ytd-ad-slot-renderer
youtube.com##ytd-rich-item-renderer:has(ytd-ad-slot-renderer)

Hög luftfuktighet vid höstskörden och stötar vid frakt kan förstöra en hel del lökar.

I’d also be interested in a list of companies that advertise on X.

Probably most films by Darren Aronofsky. Pi and The Fountain are some of the worst movies I’ve seen. Feels like someone’s artsy shroom trip. I dislike most “artsy” movies without a coherent story.

Also a lot of horror classics bores me to death. For example The Omen, Poltergeist, The Exorcist.

From the uBO subreddit: https://old.reddit.com/r/uBlockOrigin/comments/1etvawp/youtube_ads_detection_breakages_2024_08_16_ubo/m31kbkw/

There was just an update to Quick fixes. Please test if it works for you.

1. Click Here to update the list.
2. If you disabled the list previously, enable it back.
3. Close all previously opened YT tabs and try in a new one.

Just a reminder: Please always treat disabling lists as a last resort/temporary solution type of thing. Without that list, you won’t be receiving important filter updates and will likely encounter ads after a while. So don’t keep it disabled forever - verify that it’s still necessary (daily?).

The performance issues are because of Adblock and Adblock Plus: https://nitter.net/gorhill/status/1746263759495077919#m

It affects more sites than just YouTube.

Only if there would be one casting a shadow of spinning blades on my face every day. Otherwise I don’t mind them.

Adblockers will still be allowed, they will just be crippled a lot. It will probably be the same as the adblocking situation on Safari.

If any 3rd party browser vendor wants to maintain a Chromium fork with Manifest V2, they can do so, but with the risk of code maintenance hell. They would also need an extension store for Manifest V2 extensions. Otherwise V2 extensions needs to be installed manually.

Browser vendors can also create their own separate ad blockers that aren’t affected by the changes. For example Brave Shields, Vivaldi adblock, Opera adblock, etc.

By doing that you’re wasting bandwidth on all the CDNs that hosts ALL your filter lists. Updating the Quick fixes list should be enough. (Which updates every 5 hours automatically on uBO 1.54).

How to manually update Quick Fixes (Manual updates push back automatic updates.)

• Click 🛡️ uBO’s icon
• the ⚙ Dashboard button
• the Filter lists pane
• the 🕘 clock icon next to the uBlock filters – Quick fixes list
• the 🔃 Update now button.

If you want to remove parameters from urls you can use the removeparam filter in uBlock Origin. Documentation: https://github.com/gorhill/uBlock/wiki/Static-filter-syntax#removeparam

For example: /?igshid=$removeparam=igshid,domain=instagram.com

For the best performance it’s recommended to make sure the parameter is included in the filter as seen above with /?igshid, and with the domain it originated from.

Filters for the examples in OPs post:

/?igshid=$removeparam=igshid,domain=instagram.com
?is_from_webapp$removeparam=is_from_webapp,domain=tiktok.com
&t=$removeparam=/^amp;/,domain=x.com

There’s also a filter that removes a lot of known params: https://github.com/DandelionSprout/adfilt/blob/master/LegitimateURLShortener.txt

uBO Lite have a lot of limitations:

• Filter lists update only when the extension updates (no fetching up to date lists from servers)
• Many filters are dropped at conversion time due to MV3’s limited filter syntax
• No crafting your own filters (thus no element picker)
• No strict-blocked pages
• No per-site switches
• No dynamic filtering
• No importing external lists

Anti-adblock killer by Reek

That thing is unmaintained and have not been updated for over 7 years. It will do absolutely nothing.

If you have issues with YouTube: https://old.reddit.com/r/uBlockOrigin/about/sticky?num=2

I have to add some things though:

1. Read the thread thoroughly, you may have missed a step or 2, or may have misunderstood something. There’s a lot of noise in the replies. Filter maintainers can’t always give support or keep up with the noise. Being pushy, unfriendly, or replying to the thread without doing every step will not fix the problem for you. If you have technical knowledge, consider contributing that knowledge.
2. Do not add random filters, scripts, extensions from random users. If you don’t understand what you’re doing you may add something that may work against you instead of for you, or in worse cases add something malicious.
3. YouTube seems to update their anti-ab script at least twice a day more or less. So just: Click 🛡️ uBO’s icon > the ⚙ Dashboard button > the Filter lists pane > the 🕘 clock icon at the end of the uBlock filters – Quick fixes list > the 🔃 Update now button. Do NOT click purge all caches and update now, that will only add more pressure to the filter hosts.
4. If there’s a mismatch between the filter fixes and YouTube’s latest fixes, just wait, watch the video logged out, or use an alternative front-end like piped, invidious, or whatever.

Also for anyone wondering how to set the default quality for videos.

Edit your mpv.confand add ytdl-format=bestvideo[height<=720]+bestaudio/best[height<=720] to play all videos in 720p for example.

Lemmy can’t display some characters correctly. replace < with a left pointing arrow <

Use farside when recommending alternative front ends. This way users will be redirected to a random working instance.

For piped you can use: https://farside.link/piped/

And for a video: https://farside.link/piped/watch?v=dQw4w9WgXcQ

They target accounts, not logged out users.

NewPipe from F-Droid. (Do not download any of those from Google’s store.)