

You’re not going to short anything.
The power pins (VCC) on your phone’s USB-C port aren’t “live” at all times, the standard requires communication over CC1 and CC2 to negotiate which side is receiving power and at what voltage. Otherwise, a specific value of resistor needs to be in place between those pins and GND to get “dumb” charging at the original 5V usb standard.
The ideal tool is going to be thin and rigid so that you can get to the base of the port and free up impacted dust/lint. Small enough plastics are going to be to flexible to be effective, anything too thick is going to increase the working time and risk putting pressure against the center tab, potentially damaging it.
I fix consumer electronics for a living, my tool of choice is a pair of ultrasharp tweezers I use for microsoldering. Far as household items are concerned, a real small sewing needle is definitely it. The eye can even be used to catch and pull out fluff.












This 49 minute video ends with the presenter saying that fixes for what they demonstrated were shipped in July’s patch Tuesday
The recommended mitigation is the use of TPM and a PIN, which is going to apply to any machine where the user went “with the flow” during Windows 11’s OOBE